DURKOPP ADLER 550-867 Extra instructies - Pagina 15

Blader online of download pdf Extra instructies voor {categorie_naam} DURKOPP ADLER 550-867. DURKOPP ADLER 550-867 20 pagina's. Btsr sensor

Fitting the new parts

3. If the position is NOT correct, the thread guide will have to be bent

Abb. 16: Bending the thread guide

4. Bend the thread guide using a pair of pliers in the upper left area (3).

5. Bend the thread guide back again afterwards in the right-hand area (4)

5.2 Installing the BTSR sensor

Abb. 17: Installing the BTSR sensor

1. Fit the nut (3), washer and screw of the BTSR sensor.

2. Tighten the nut (3) with a 7 mm wrench.

Additional Instructions 550-867 - 01.0 - 08/2017

slightly.

③

(3) - Upper left area

if necessary.

③

(3) - Nut

(4) - Right area

④