Data Track tracker 211 Benutzerhandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor Data Track tracker 211 herunter. Data Track tracker 211 20 Seiten. Low cost panel indicator
Seite drucken
Temperature & Process Measurement Indicators Setup Guide
the menu parameters until the measured value display is
restored.
Editing a Value
b)
Other parameters are changed by editing a value (eg. the
parameter HdSP has a default numeric value of [100.0]).
Press the Next Key to edit the flashing digit and the Enter
Key to select the next digit for editing.
The following example will show you how to edit a numeric
value. We will change the high display value (labelled HdSP).
With the unit displaying the measured value, press and
hold down the Enter Key for approximately 3 seconds
until the display begins to flash.
Press the Next Key and the flashing display should be
replaced with the message inPt (the first menu parameter).
Press the Next Key repeatedly until HdSP is displayed.
Press the Enter Key and 100.0 will be displayed (with the
least significant digit flashing).
Press the Next Key to scroll through digit values 0 to 9
and edit the least significant digit.
To move to the next most significant digit, press the
Enter Key and the digit will flash.
Repeat the previous 2 steps until the left most significant
digit is flashing.
Press the Next Key to scroll through digit values -1, - and
0 to 9.
If the value allows the dP position to be moved, the dP
will flash. To move the dP position, use the Next Key.
Press the Enter Key to save this value and exit. When the
Enter Key is pressed and the left most significant digit is
flashing, the display will return to the menu parameter, ie.
HdSP.
Press the Next Key repeatedly to scroll through the rest of
the menu parameters until the measured value display is
restored.
20-5110 Issue G
11