CAVE TeamUp TX20i Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera CAVE TeamUp TX20i herunter. CAVE TeamUp TX20i 20 Seiten. 4k ptz camera
Auch für CAVE TeamUp TX20i: Handbuch zur Schnelleinrichtung (4 seiten)

Seite drucken

CAVE-TEK TeamUp TX20i Camera

Network Function

5.1 Operating Environment

Operating System: Windows 7/8/10, Mac OS X, Linux, Android

Network Protocol: TCP/IP

System Requirement: Intel Duo Core /256M RAM/40G HDD/ Graphics card support DirectX 9.0 or later

version.

5.2 Equipment Installation

1) Connect internet camera to your internet or to your PC directly via network cable.

2) Turn on DC 12V power.

3) If the network connection is normal, the connection light (green) at the network interface will light up

within 5 seconds. The data indicator (orange) will flash, indicating that the camera's physical

connection has been completed.

5.3 Internet Connection

There are two main ways to connect network camera.

Connect by Network Cable

Connect by Switch/Router

5.4 Camera controlled by LAN

5.4.1 Setup IP address

If you don't know the camera IP, view as below:

Method 1: Press * and # and 4 on the remote controller one by one; the camera IP address will be shown

on screen.

Change IP address, two methods as below:

Method 1: Login to the web page, select "Network > Lan Settings," change IP address. Click "Apply" then

restart the camera.

Method 2: Press * and # and Manual on the remote controller one by one; the camera IP address will

restore to the default IP address (192.168.100.88).

User Guide