Datacom Systems FTP-4000 Series Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware Datacom Systems FTP-4000 Series herunter. Datacom Systems FTP-4000 Series 2 Seiten.

Seite drucken

Tap Series FTP-1000,2000,4000

FASTstart Guide

Correct Wiring: When installing a Fiber Tap, it is important to make sure that the Tx and

Rx fibers are connected to the respective ports on the Fiber Tap. When wired correctly, the

traffic incoming on an Rx port will be split before being sent to two separate Tx ports (One

copy to the other Network device, the other copy to Monitor).

Reverse Wiring: If the fibers are connected backwards, light will not be received on the

monitoring port. This is because the internal coupler that splits the light is unidirectional.

To Avoid Reverse Wiring: Reverse wiring can be difficult to catch initially, since an

incorrectly cabled Fiber Tap will still send light between the network ports and connectivity

will be seen on both network endpoints. Be sure to check the for light on the monitor ports as

well as the network ports when installing the Fiber Tap.

Customer Service

is available from our website: www.datacomsystems.com or by calling +1 315 463 9541

541-0149-R

For More information

Page 2

DATACOM

S Y S T E M S I N C