Elsema Gigalink GLR2708 Anweisungen zur Einrichtung und Programmierung - Seite 7
Blättern Sie online oder laden Sie pdf Anweisungen zur Einrichtung und Programmierung für Empfänger Elsema Gigalink GLR2708 herunter. Elsema Gigalink GLR2708 8 Seiten. 8-channel 27mhz receiver with open collector outputs
Auch für Elsema Gigalink GLR2708: Handbuch (7 seiten)
Seite drucken
MODE SETTING
When the GIGALINK
cable is disconnected the 4-way dipswitch functions as a mode selector for the output. User
™
should set the receiver mode correctly. See below table for different mode setting.
Dipswitch Mode Settings
The output relay will respond in the following manner when receiving the correct signal from a transmitter.
1 2 3 4
* Dipswitch 4 is reserved
Enter the World of Wireless
"All Momentary": Relay on, only while correct signal is received
"All Latching": Outputs alternate at every correct incoming signal
"Momentary & Latching": Outputs 1-4 are momentary & 5-8 are latching
"Security Latching on": Outputs will be on until supply to receiver is momentarily
interrupted
"Momentary & Latching": Outputs 1-6 are momentary & 7-8 are latching
"Momentary & Latching": Outputs 1-2 are momentary & 3-8 are latching
"Momentary & Latching": Outputs 1-3 are momentary & 4-8 are latching
"Security Latching on": Output 1 is security latching & 2-8 are momentary
7