Elsema Gigalink GLR2708 Petunjuk Pengaturan dan Pemrograman - Halaman 7
Jelajahi secara online atau unduh pdf Petunjuk Pengaturan dan Pemrograman untuk Penerima Elsema Gigalink GLR2708. Elsema Gigalink GLR2708 8 halaman. 8-channel 27mhz receiver with open collector outputs
Juga untuk Elsema Gigalink GLR2708: Manual (7 halaman)
Halaman Cetak
MODE SETTING
When the GIGALINK
cable is disconnected the 4-way dipswitch functions as a mode selector for the output. User
™
should set the receiver mode correctly. See below table for different mode setting.
Dipswitch Mode Settings
The output relay will respond in the following manner when receiving the correct signal from a transmitter.
1 2 3 4
* Dipswitch 4 is reserved
Enter the World of Wireless
"All Momentary": Relay on, only while correct signal is received
"All Latching": Outputs alternate at every correct incoming signal
"Momentary & Latching": Outputs 1-4 are momentary & 5-8 are latching
"Security Latching on": Outputs will be on until supply to receiver is momentarily
interrupted
"Momentary & Latching": Outputs 1-6 are momentary & 7-8 are latching
"Momentary & Latching": Outputs 1-2 are momentary & 3-8 are latching
"Momentary & Latching": Outputs 1-3 are momentary & 4-8 are latching
"Security Latching on": Output 1 is security latching & 2-8 are momentary
7