Elseta IOMOD 16DI Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für E/A-Systeme Elseta IOMOD 16DI herunter. Elseta IOMOD 16DI 17 Seiten.

IOMOD 16DI

4/14/2017

Fig. 6.3

b. IOMOD configuration with PuTTY terminal

Configuration of IOMOD device is done through CLI (Command Line Interface) on virtual COM port.

Drivers needed for MS Windows to install VCOM will be provided. To open up CLI simply connect to

specific V-COM port with terminal software (advised to use PuTTY terminal software. If other software is

being used, user might need to send <return> symbol after each command). When connected user

should immediately see main screen:

Fig. 6.4

Navigation is performed by sending number to terminal. User then proceeds by following further on-

screen instructions. For example, to set Baudrate, press [2] to enter Baudrate screen; press [1] to edit;

enter new configuration; press [RETURN] to save, or [ESC] to cancel changes. When done, press [0]

(exit) before disconnecting device. Default values is set by pressing [6] on main screen, and confirming

changes [1].

If accidentally closed the terminal window, user can connect terminal program again, and press any key

on keyboard to show up main menu.

V1.1 | ELSETA | Configuration over USB