Elseta IOMOD 16DI Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für E/A-Systeme Elseta IOMOD 16DI herunter. Elseta IOMOD 16DI 17 Seiten.
Seite drucken
4/14/2017
IOMOD 16DI
c. Main Menu
Menu
Name
1.
Slave Address
2.
Communication
settings
3.
Input State
Inversion
5.
Input Filter
time
6.
Input counter
restart
7.
Set Default
Settings
8.
Firmware
Upgrade
9.
Diagnostics
0.
Exit
d. Protocol simulator
When entered diagnostics screen, user can turn on protocol simulator by pressing [9]. When protocol
simulator is turned on, device will communicate through USB port rather than RS-485 line.
Communication on RS-485 line is closed and all Modbus commands will be accepted only from USB. To
exit this mode user must restart device.
V1.1 | ELSETA | Configuration over USB
14
Function
Modbus Slave address /
ID
Enters baudrate, data
and parity bit,
termination resistor
screen
Input inversion (Inverts
input states in modbus)
Configures input pulse
filter time
Restarts all input
counter registers to 0
Sets Default Settings
Mass Storage Device
Firmware Upgrade
Input / Output states
Exit and disconnect
Values
Default
Values
1-247
(default: 1)
-
(default: 9600;
8+1+N;
termination
resistor - on)
0 - 1 (off/on)
(default: 0)
0 – 256000
(default: 100)
(miliseconds)
(1 to confirm,
0 to cancel)
(1 to confirm,
0 to cancel)
(1 to confirm,
0 to cancel)
-
-
-
-
-
-
-