Elsner Suntracer KNX basic Series Technische Daten und Installationsanweisungen - Seite 7

Blättern Sie online oder laden Sie pdf Technische Daten und Installationsanweisungen für Wetterstation Elsner Suntracer KNX basic Series herunter. Elsner Suntracer KNX basic Series 12 Seiten.

Seite drucken

2.2.3. Preparing the weather station

Unsnap cover

and remove upwards

Fig. 9

Screw-on cover (230V

device)

Cover with rain sensor

Cover snaps

Bottom part of housing

The weather station cover with the rain sensor snaps in on the left and right along the

bottom edge (see Fig.). Remove the weather station cover. Proceed carefully, so as not

to pull off the wire connecting the PCB in the bottom part with the rain sensor in the

cover (soldered cable connection in case of 230 V AC version, cable with plug in case

of 24 V DC version).

Push the power supply and bus connection cable through the rubber seal on the bot-

tom of the weather station and connect voltage LN and bus +/- to the provided clamps.

Weather Station Suntracer KNX basic • Status: 15.07.2013 • Technical changes reserved. Errors reserved.

Installation and commissioning