Elsner IMSG-UC-4H Handbuch Technische Daten - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch Technische Daten für Kontrolleinheit Elsner IMSG-UC-4H herunter. Elsner IMSG-UC-4H 8 Seiten. Motor control unit
Seite drucken
Storing a movement position
Storing a position is carried out as follows:
•
Move the drive to the starting/zero position, i.e. close the window, retract the
awning or raise the blinds
•
Press the
and
•
As feedback the drive moves briefly up and down. You are in now Programming
mode
•
Move to the desired position
•
Store the position by pressing the
time
•
As feedback the drive moves briefly up and down
•
With blind slats, now open the slats to the desired angle. With awnings, tighten the
canvas with
•
Store by again pressing the
•
As feedback the drive moves briefly up and down. The storage is complete and the
IMSG-UC-4H is again in normal mode
Note: As soon as a central command arrives (e.g. because of a wind or rain alarm), the
Programming mode will be interrupted! In this case, please carry out the position storage
again when the central command is no longer present.
Calling up a movement position
The stored position can be called up by pressing the
for 3-6 seconds.
The drive will move to the movement position directly if it is in a secure position and the
runtimes of previous commands have expired. If the drive is in an intermediate position,
it will move initially to the secure position and then to the stored position after expiry of
the runtime.
Technical data
Housing:
Colour:
Installation:
Protection rating:
Dimensions:
Weight:
Ambient temperature:
Ambient humidity:
Auxiliary voltage:
Inputs:
Outputs:
4
Motor control unit IMSG-UC-4H • Status 30/06/2010 • Subject to technical changes. Errors excepted.
buttons for three seconds at the same time
. For windows, you can skip this point.
and
Plastic
White
Series installation on mounting rails
IP 20
approx. 107 x 88 x 60 (W x H x D, mm), 6 modules
approx. 360 g
Operation -20...+70°C, storage -55...+90°C
max. 95% rH, avoid dew
230 V AC, 50 Hz
• Central (Up/Down)
• 4 x hand switches (Up/Down buttons)
• 4 x Drive 230 V (PE/N/Down/Up), each 4 A
and
buttons for 1 second long at the same
buttons for 1 second long at the same time
button of the appropriate channel