Elsner IMSG-UC-4H Teknik Veri Kılavuzu - Sayfa 4

Kontrol Ünitesi Elsner IMSG-UC-4H için çevrimiçi göz atın veya pdf Teknik Veri Kılavuzu indirin. Elsner IMSG-UC-4H 8 sayfaları. Motor control unit

Sayfayı Yazdır

Storing a movement position

Storing a position is carried out as follows:

•

Move the drive to the starting/zero position, i.e. close the window, retract the

awning or raise the blinds

•

Press the

and

•

As feedback the drive moves briefly up and down. You are in now Programming

mode

•

Move to the desired position

•

Store the position by pressing the

time

•

As feedback the drive moves briefly up and down

•

With blind slats, now open the slats to the desired angle. With awnings, tighten the

canvas with

•

Store by again pressing the

•

As feedback the drive moves briefly up and down. The storage is complete and the

IMSG-UC-4H is again in normal mode

Note: As soon as a central command arrives (e.g. because of a wind or rain alarm), the

Programming mode will be interrupted! In this case, please carry out the position storage

again when the central command is no longer present.

Calling up a movement position

The stored position can be called up by pressing the

for 3-6 seconds.

The drive will move to the movement position directly if it is in a secure position and the

runtimes of previous commands have expired. If the drive is in an intermediate position,

it will move initially to the secure position and then to the stored position after expiry of

the runtime.

Technical data

Housing:

Colour:

Installation:

Protection rating:

Dimensions:

Weight:

Ambient temperature:

Ambient humidity:

Auxiliary voltage:

Inputs:

Outputs:

Motor control unit IMSG-UC-4H • Status 30/06/2010 • Subject to technical changes. Errors excepted.

buttons for three seconds at the same time

. For windows, you can skip this point.

and

Plastic

White

Series installation on mounting rails

IP 20

approx. 107 x 88 x 60 (W x H x D, mm), 6 modules

approx. 360 g

Operation -20...+70°C, storage -55...+90°C

max. 95% rH, avoid dew

230 V AC, 50 Hz

• Central (Up/Down)

• 4 x hand switches (Up/Down buttons)

• 4 x Drive 230 V (PE/N/Down/Up), each 4 A

and

buttons for 1 second long at the same

buttons for 1 second long at the same time

button of the appropriate channel