ADE EHR1 Betriebshandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Skalen ADE EHR1 herunter. ADE EHR1 20 Seiten. Platform scale

Automatic Switch-off

For energy saving the scale can be set for automatic switch-off. Automatic switch-off can be

preselected after 1 up to 15 minutes or disabled.

When scale is on, press both button ON/OFF/

appears in display.

Then display shows P1.xx and the first digit is flashing.

By pressing button „T" you can change the digit. The value of the digit can be changed by

pressing button „U".

Both digits together means the remaining time until automatic switch-off.

By preselection of P1.00 automatic switch-off is disabled.

After setting the preselection press button „T" and P2.xx appears in display for preselecting

hold function.

To save the preselection and to leave SETUP-menu press button ON/OFF/

The scale has a hold function which can be preselected for automatic hold or which van be

disabled.

When scale is on, press both button ON/OFF/

appears in display.

Then display shows P1.xx and the first digit is flashing.

Now press button „T" again, until P2.xx appears in display and the first digit is flashing.

By pressing button „T" you can change the digit. The value of the digit can be changed by

pressing button „U".

By preselection of P2.00 Auto-Hold-Function is enabled.

Further preselections are P2.01 (automatic hold, until larger weight reading), P2.02 (automatic

hold, when weight is below 10d and auto-hold new stable weight is more than 10d), P2.03...50

(automatic hold, when unchangeable reading when the variety is within +/-3d bis 50d).

After setting the preselection press button „T" and P3.xx appears in display for preselecting

RS232 interface settings.

To save the preselection and to leave SETUP-menu press button ON/OFF/

EHR_EHQ-210517-Rev009-UM-en

and

„U" same time as long as SETUP

and

„U" same time as long as SETUP