CBT Supply SFI-363030-TKF Montageanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung für Inneneinrichtung CBT Supply SFI-363030-TKF herunter. CBT Supply SFI-363030-TKF 5 Seiten. Fiip-it series

Seite drucken

c CBT Supply Inc.

The Smartdesk is packaged ready to be assembled. Included is a Master Parts and Panel List showing diagrams of all parts

and hardware required for assembly. Please note, improper installation may void Smartdesk warranty. To install correctly

follow the enclosed instructions. If you need additional assistance or information please contact Technical Service at 410-

Unpack Parts and Hardware:

Parts and panels will vary according to Smartdesks model. See Parts & Panels List and Hardware Inventory Sheet.

Please verify all parts and quantities prior to assembly. Contact the factory if your quantities are incomplete.

Note: All panels are predrilled ready for assembly.

Note:Keyboard/Hinge Mechanism comes preassembled on pull-out hinge attached to Desktop.

NOTE: DO NOT CUT THE NYLON CABLE TIE FROM THE KEYBOARD HINGE UNTIL THE DESK IS ASSEMBLED AND UPRIGHT.

Tools needed for assembly:

Power drill with #2 Phillips screwdriver bit and regular #2 Phillips screwdriver.

The following diagram shows the contents of the hardware bag.

Contents of Hardware Bag: (quantities for each unit - multiply by number of components)

14 ea. - Cam Pins

push through holes in panels,

(Side Panels, Back Panels,

Support Panels, CPU Bottom)

SFI-363030-TKF

SFI-443030-TKF

SFI-483030-CKF

SFI-603030-CKF

SFI-723030-CKF

See flipIT LCD Monitor Installation Instructions for securing of LCD Flat Display * to flipIT

SFI Single Workstations

Smartdesks FI Single Workstations

1 ea. - Wire Trough

black PVC used to contain

wiring inside rear of

Back Panel

Flip-it Single Series

Page 2

Rotating Desktop Panel