Datamax I-Class Mark II Handbuch für Installation und Gebrauch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Gebrauch für Etikettenhersteller Datamax I-Class Mark II herunter. Datamax I-Class Mark II 12 Seiten. General purpose input output (gpio) option
Auch für Datamax I-Class Mark II: Schnellstart-Handbuch (4 seiten)

Seite drucken

1. Installing the Option
2. Setup and Operation

Installing the Option

If the GPIO Card is already installed in the printer, skip this section and proceed to

"Configuring the Hardware". Otherwise, install the GPIO Card as described below:

A) Turn off and disconnect the power cord from the printer. Remove the three Screws

from the left side cover of the printer.

B) Open the printer's cover, loosen (do not remove) the two Screws on the inside of the

printer and lift the Cover Assembly up and off the printer.

Screws

Cover

Assembly

Screws