Datamax A Class Mark II Installationsanleitung Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Kutter Datamax A Class Mark II herunter. Datamax A Class Mark II 14 Seiten. Cutter option

Seite drucken

Step 3: Using the Option

During operation, cut labels will be dispensed after printing. Be sure to use media that is rated for use with

the Cutter (see "Cutting Requirements," near the end of this document). Begin using the option as follows:

A) Load Media (see the Operator's Manual for

loading details). Then, route the Media out the

Cutter Opening.

B) Plug the power cord into the AC Receptacle and

turn 'On' the Power Switch.

C) Ensure that READY is displayed on the front panel then press the FEED Key, and proceed according

to your observations:

If a cut label is dispensed, this completes the installation; or,

If the label feeds forward without being cut, proceed to Step 4: "Configuring the Printer."

Cutter

Throat

Media