Datamax A Class Mark II 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} Datamax A Class Mark II에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax A Class Mark II 14 페이지. Cutter option

Step 3: Using the Option

During operation, cut labels will be dispensed after printing. Be sure to use media that is rated for use with

the Cutter (see "Cutting Requirements," near the end of this document). Begin using the option as follows:

A) Load Media (see the Operator's Manual for

loading details). Then, route the Media out the

Cutter Opening.

B) Plug the power cord into the AC Receptacle and

turn 'On' the Power Switch.

C) Ensure that READY is displayed on the front panel then press the FEED Key, and proceed according

to your observations:

If a cut label is dispensed, this completes the installation; or,

If the label feeds forward without being cut, proceed to Step 4: "Configuring the Printer."

Cutter

Throat

Media