Datapath Express9 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Computer Hardware Datapath Express9 herunter. Datapath Express9 15 Seiten.

Installing the Express9 Backplane

The Express9 backplane is fixed into the chassis by screwing down on the mounts located in

the host chassis. Ensure the rear of the Express9 backplane is facing the rear of the chassis.

The chassis will have a number of locating mounts not used by the Express9, it is important

that stand off mounts are used to ensure the reverse side of the backplane does not come

into contact with any unused mounts.

Once the Express9 is secured inside the chassis connect the power supply to one of the four

connectors (J1, J2, J3, and J4) on the Express9 backplane and connect the 12v supply (J5 or

J6).

Connect the fan headers

There is no requirement to connect the power reset cable unless using an SBC.

09/03/2011