Dux Proflo 315S1 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Warmwasserbereiter Dux Proflo 315S1 herunter. Dux Proflo 315S1 20 Seiten. Owner’s information warranty installation details electric storage water heaters
Auch für Dux Proflo 315S1: Benutzerhandbuch (20 seiten)

Seite drucken

This water heater is designed for

single phase 240V A.C supply only.

The electrical connection must

comply with Local Supply Authority

Regulations and AS/NZS3000.

For models pre-wired with a flexible

lead, if the supply cord is damaged, it

must be replaced by the manufacturer,

its service agent, or similarly qualified

person in order to avoid hazard.

For models not pre-wired with a flexible

lead, connections are made at the

terminal block inside the water heater,

and a means for disconnection must

be incorporated in accordance with the

wiring rules.

Entry to the connection area is through

the hole beneath the element cover,

designed to accept a 20mm conduit.

The element cover may be removed by

undoing the two screws on the cover

and sliding the cover downwards to

disengage the top edge. Ensure that the

conduit entry is well sealed to achieve

correct weatherproofing.

Note: This water heater is fitted with

a thermostat and over-temperature

energy cut-out. Under no circumstances

should the water heater be operated

without both these devices being in the

circuit. Replacement must be carried

out only by a qualified electrician or the

manufacturer.

Owner's Manual – Proflo Electric Storage Water Heaters

Electrical Connection

Danger: The operation of the thermal

cut-out indicates a possibly dangerous

situation. Do NOT reset the thermal

cutout until the water heater has been

serviced by a qualified person.

Caution: Water heater must be filled

with water before turning on the

electricity supply.

Electrician: Press the reset button on

thermostat to ensure over-temperature

cut-out is set.

When supply wiring has been connected,

supply wires must be kept lower than the

terminal block.

H0421

0421

Rev. J