Agri-Fab 45-02102 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Streuwagen Agri-Fab 45-02102 herunter. Agri-Fab 45-02102 13 Seiten. 125 lb. push broadcast spreader
Auch für Agri-Fab 45-02102: Benutzerhandbuch (13 seiten)
Seite drucken22. Place the adjustable stop into the "ON" end of the
slot in the top of the flow control mounting bracket.
Secure with the 1/4" x 3/4" carriage bolt, a nylon
washer, a 5/16" flat washer and the nylon wing nut.
See figure 11.
NYLON
WING NUT
5/16" FLAT
WASHER
NYLON
WASHER
FIGURE 11
ADJUSTABLE
STOP
1/4" x 3/4"
CARRIAGE BOLT
23. Position the flow control mounting bracket
(Refer to figure 12).
a. Push on flow control arm until it locks in "OFF"
position.
b. Slide flow control mounting bracket along tube
until closure plate in bottom of hopper just
closes.
c. Snug the 1/4" lock nuts just enough to hold flow
control mounting bracket in place.
d. Set adjustable stop at "5". Pull flow control arm
against stop. Verify that closure plate has
opened about half way.
e. If closure plate does not open half way, it may
be closed too far at "OFF". Adjust position of
flow control mounting bracket until closure plate
will open about half way at "5" and still close
when arm is locked in "OFF". Tighten 1/4" lock
nuts.
FIGURE 12
7
AJDUSTABLE
STOP
SETTING "5"