Austlift 915100 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitsausrüstung Austlift 915100 herunter. Austlift 915100 16 Seiten. Roofer's kit basic
Seite druckenOption 2 - Using the Rope Bag to Throw the Rope
Connect the top of the rope from the roofer's kit to the chosen anchor using the
provided karabiner. Ensure the rope grab is at the tail end of the rope and the
rope is loosely packed in the bag so it can spool out when thrown. Ensure no
other equipment is in the bag. Throw the bag over the roof allowing the rope to
spool out of it. Move the ladder to the other side of the roof to start getting ready
to connect to the roofer's kit system.
STEP 4 - CONNECTING ROPE TO HARNESS
Relocate the ladder to the other side of the roof, ensuring the ladder is secure
using a ladder securing bracket or attaching it to the structure. Attach the rope
grab and shock pack to your fitted harness.
Ensure all the loose rope is fed through the rope grab and the rope is tight and
pulling on the anchor point.
A
Attach the rope grab connector to the front or rear fall arrest harness points
before you leave the ground.
Always work from a position below the apex of the roof. Only use short lanyard
connectors of 450mm or less (inc hooks/ karabiners).
AUSTLIFT ROOFER'S KIT
Shock pack
Rope grab
PERSONAL PROTECTION EQUIPMENT
Screw karabiner
(connect to harness)
Stop knot
7