Austlift 915100 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Засоби безпеки Austlift 915100. Austlift 915100 16 сторінок. Roofer's kit basic

Option 2 - Using the Rope Bag to Throw the Rope

Connect the top of the rope from the roofer's kit to the chosen anchor using the

provided karabiner. Ensure the rope grab is at the tail end of the rope and the

rope is loosely packed in the bag so it can spool out when thrown. Ensure no

other equipment is in the bag. Throw the bag over the roof allowing the rope to

spool out of it. Move the ladder to the other side of the roof to start getting ready

to connect to the roofer's kit system.

STEP 4 - CONNECTING ROPE TO HARNESS

Relocate the ladder to the other side of the roof, ensuring the ladder is secure

using a ladder securing bracket or attaching it to the structure. Attach the rope

grab and shock pack to your fitted harness.

Ensure all the loose rope is fed through the rope grab and the rope is tight and

pulling on the anchor point.

Attach the rope grab connector to the front or rear fall arrest harness points

before you leave the ground.

Always work from a position below the apex of the roof. Only use short lanyard

connectors of 450mm or less (inc hooks/ karabiners).

AUSTLIFT ROOFER'S KIT

Shock pack

Rope grab

PERSONAL PROTECTION EQUIPMENT

Screw karabiner

(connect to harness)

Stop knot