Austlift 915100 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Засоби безпеки Austlift 915100. Austlift 915100 16 сторінок. Roofer's kit basic

STEP 5 - WORK IN RESTRAINED POSITION

Always maintain a three point of contact when climbing or descending the

ladder. As you move upwards, ensure the rope grab is moving up the rope with

you. If the rope starts to lift forming a loop in the rope, stop climbing and slide

the rope grab up so the rope is tight again.

Keep the rope as tight as possible and pull against the anchor, as this willreduce

the fall distance. Working in a work restraint technique is the safest way to

ensure a limited fall distance.

RESTRAINT TECHNIQUE

SYSTEM DESCRIPTION

A combination of anchorage placement and lanyard length adjustment which

will not physically permit the operator to reach a fall risk position unless the

lanyard is incorrectly adjusted. Control on a person's movement by use of

a fall- arrest system, which entails connection to an anchorage using an

adjustable lanyard or other components that can be adjusted for length

as necessary to physically prevent the person from reaching a position at

which there is a risk of a free or limited free fall.

REQUIREMENTS

Where any possible fall will only be a limited free fall (<600 mm):

1. A full-body harness

2. Anchorage with ultimate strength 15 kN

TYPICAL APPLICATION

Any situation where access to the work can be

achieved entirely on a working surface with secure

footing and without exposure to a fall, provided that

the equipment is correctly adjusted.

Take care when transferring to the roof.

Establish Restraint Technique position.

1300 100 120

AUSTLIFT ROOFER'S KIT

60°

Once Restraint Technique position

is established, work within a 60°

arc, avoiding pendulum swing falls.