AUSTRALIAN MONITOR AMPCS60 Installations- und Betriebshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Redner AUSTRALIAN MONITOR AMPCS60 herunter. AUSTRALIAN MONITOR AMPCS60 6 Seiten. Premium ceiling speaker
Auch für AUSTRALIAN MONITOR AMPCS60: Spezifikationen (2 seiten)
Seite druckenINSTALLATION
3. Position mounting hardware
If working from below ceiling, mounting hardware can be disassembled, passed through
the hole, and then reassembled.
Tile Rails should be positioned over the ceiling grid, C-Bracket slides engaged, and then
locating screws tightened. See diagram 2.
CAUTION: Always use all supplied mounting hardware with ceiling tiles.
Diagram 2
PAGE 4
AMPCS60 INSTALLATION & OPERATION MANUAL
4. Wiring
Remove the supplied 4-pole connector from the speaker, and terminate to speaker cable
(see diagram 3).
Loop-through terminals are provided (see diagram 4). When this wiring method is
used, you should be aware that when a speaker is not plugged in there is no path to
subsequent speakers.
An alternative is to wire incoming and outgoing cables in parallel. Pin 2 is +'ve and pin 3 is -'ve.
Diagram 3
Diagram 4
Speaker 1
Speaker 2
Power Amplifier
AMPCS60 INSTALLATION & OPERATION MANUAL
INSTALLATION
To Subsequent
Speaker
Speaker 3
PAGE 5