- ページ 4

スピーカー AUSTRALIAN MONITOR AMPCS60のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AUSTRALIAN MONITOR AMPCS60 6 ページ。 Premium ceiling speaker
AUSTRALIAN MONITOR AMPCS60 にも：仕様 (2 ページ)

ページを印刷する

INSTALLATION

3. Position mounting hardware

If working from below ceiling, mounting hardware can be disassembled, passed through

the hole, and then reassembled.

Tile Rails should be positioned over the ceiling grid, C-Bracket slides engaged, and then

locating screws tightened. See diagram 2.

CAUTION: Always use all supplied mounting hardware with ceiling tiles.

Diagram 2

PAGE 4

AMPCS60 INSTALLATION & OPERATION MANUAL

4. Wiring

Remove the supplied 4-pole connector from the speaker, and terminate to speaker cable

(see diagram 3).

Loop-through terminals are provided (see diagram 4). When this wiring method is

used, you should be aware that when a speaker is not plugged in there is no path to

subsequent speakers.

An alternative is to wire incoming and outgoing cables in parallel. Pin 2 is +'ve and pin 3 is -'ve.

Diagram 3

Diagram 4

Speaker 1

Speaker 2

Power Amplifier

AMPCS60 INSTALLATION & OPERATION MANUAL

INSTALLATION

To Subsequent

Speaker

Speaker 3

PAGE 5