AUSTRALIAN MONITOR XRS12 Installations- und Betriebshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Redner AUSTRALIAN MONITOR XRS12 herunter. AUSTRALIAN MONITOR XRS12 13 Seiten. Passive, powered and outdoor loudspeakers
Seite drucken
REAR PANEL
Passive and Constant Voltage
XRS8B shown here
2 Way Full Range Speaker
Built-in Passive 2 Way Crossover
2+
Frequency Response (-3dB)
1-
Sensitivity (dB 1W 1m)
Impedance
2-
1+
Recommended Max Power (Program)
1+ 1- : INPUT
SN:
1
1
Speaker Input
The input connector is a 4 pole twist lock, speakON
compatible connector. Pins 1+ and 1- are wired to
+ve and -ve respectively of the speaker. The XRS10
and XRS12 have two connectors. They are wired in
parallel so either connector can be used as an input,
the other as a loop through.
XRS8B
65Hz-18kHz
92 dB
8 Ohm
200W
Made in China
XRS8ODV shown here
XRS8 ODV
2 Way Full Range Speaker
Weather Proof 100V/70V
Frequency Response (-3dB)
65Hz-18kHz
Sensitivity (dB 1W 1m)
92 dB
Impedance
8 Ohm
Recommended Max Power (Program)
100V 100W/70V 50W
100V 50W/70V 25W
100V N.C/70V 100W
100V 25W/70V N.C
8 OHM BYPASS
SN:
Made in China
1
2
1
Voltage Tap Select Switch
A switch on the back of the XRS ODV speakers allows
you to select the desired transformer tap. Each speaker
has 3 taps at 70 V and 100 V, as well as a low impedance
transformer bypass option.
Fly Lead (Speaker Input)
2
The XRS ODV series speakers come supplied with a
2 core flying lead as input to the speaker. The flying lead
wires are red (positive +) and black (negative -) and are
used as an input to the speaker for both constant voltage
and low impedance inputs.
XRS SERIES INSTALLATION AND OPERATION MANUAL
200W
5