AUSTRALIAN MONITOR XRS12 Panduan Instalasi dan Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Pembicara AUSTRALIAN MONITOR XRS12. AUSTRALIAN MONITOR XRS12 13 halaman. Passive, powered and outdoor loudspeakers
Halaman Cetak
REAR PANEL
Passive and Constant Voltage
XRS8B shown here
2 Way Full Range Speaker
Built-in Passive 2 Way Crossover
2+
Frequency Response (-3dB)
1-
Sensitivity (dB 1W 1m)
Impedance
2-
1+
Recommended Max Power (Program)
1+ 1- : INPUT
SN:
1
1
Speaker Input
The input connector is a 4 pole twist lock, speakON
compatible connector. Pins 1+ and 1- are wired to
+ve and -ve respectively of the speaker. The XRS10
and XRS12 have two connectors. They are wired in
parallel so either connector can be used as an input,
the other as a loop through.
XRS8B
65Hz-18kHz
92 dB
8 Ohm
200W
Made in China
XRS8ODV shown here
XRS8 ODV
2 Way Full Range Speaker
Weather Proof 100V/70V
Frequency Response (-3dB)
65Hz-18kHz
Sensitivity (dB 1W 1m)
92 dB
Impedance
8 Ohm
Recommended Max Power (Program)
100V 100W/70V 50W
100V 50W/70V 25W
100V N.C/70V 100W
100V 25W/70V N.C
8 OHM BYPASS
SN:
Made in China
1
2
1
Voltage Tap Select Switch
A switch on the back of the XRS ODV speakers allows
you to select the desired transformer tap. Each speaker
has 3 taps at 70 V and 100 V, as well as a low impedance
transformer bypass option.
Fly Lead (Speaker Input)
2
The XRS ODV series speakers come supplied with a
2 core flying lead as input to the speaker. The flying lead
wires are red (positive +) and black (negative -) and are
used as an input to the speaker for both constant voltage
and low impedance inputs.
XRS SERIES INSTALLATION AND OPERATION MANUAL
200W
5