austriamicrosystems AS1109 Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Hauptplatine austriamicrosystems AS1109 herunter. austriamicrosystems AS1109 8 Seiten. White goods demo board 64 leds, i2c interfaced led driver with keyscan
Seite druckenAS1115 - Demo Board Manual
White Goods
Software
To use the AS1115 White Goods Demoboard a controller is required. The controller can be connected to the
demoboard via the I/O Connector "D".
If no controller is available the austriamicrosystems USB box in combination with the AS1115 White Goods
Demoboard software can be used as well. This USB box is needed to set-up the connection between the
demoboard and the USB interface of a PC. The USB box can be ordered via http://www.austriamicrosystems.com.
The AS1115 Demoboard is controlled via the software and the board is only working in connection with software.
The condition of the LED's (ON or OFF) or the different buttons can be triggered via the software or directly on
the board.
Picture 1: Software Panel
Note:
As a first step make sure that the hardware connection between the PC and the Demoboard via the
austriamicrosystems USB box is set.
The second step is to connect the software to the board. For this go to the USB menu and click on "connect" (see
Picture 2: Software Panel detail). If the USB sign on the right lower side (see Picture 1: Software Panel) is turned
to green the software is correct linked to the demoboard.
Picture 2: Software Panel detail
www.austriamicrosystems.com
Revision 1.04
4 - 7