Austroflamm SmartSpot Gebrauchsanweisung - Seite 12
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Temperaturregler Austroflamm SmartSpot herunter. Austroflamm SmartSpot 14 Seiten. Room temperature sensor
Auch für Austroflamm SmartSpot: Gebrauchsanweisung (20 seiten)
8 | LED colour codes and error causes
8
LED colour codes and error causes
SmartSpot sensor
LED Status
LED does not light up
LED quickly flashing green
LED flashes yellow
LED flashes red
No or wrong temperature value
No connection
Recorded temperature is too high
Connection is often broken
SmartSpot receiver
LED Status
slowly flashing green
quickly flashing green
Green is lit up
Green is lit up
Red flashing
Green is lit up
Red is lit up
No connection
12
EN
Possible cause
• Insulating strip for batteries
not removed
• Missing or dead battery
• Battery polarity wrong
• "Sign of life" function
• disabled
• The sensor is looking for a
connection
• Battery low
• Battery dead
• SmartSpot is not connected
• The SmartSpot is too far away • Reduce the distance to the
• SmartSpot is incorrectly
placed
• SmartSpot is too far away
from the receiver / display
Possible cause
• No connection to sensor
• Receiver is looking for con-
nection
• Connection to the sensor
maintained
• Battery on the sensor is dead
• FACTORY reset
• The SmartSpot is too far away • Reduce the distance to the
Solution
• Remove insulating strip
• Check batteries
• Insert batteries correctly
• Hold down the appropriate
button
• to enable the "Life" function
again
• On the receiver or display,
also press the button for
"Connect"
• Battery status <20%
• Battery status <10%
• Connect SmartSpot as per in-
structions
stove
• Avoid direct sunlight, proxim-
ity to electrical devices and
other heat sources when us-
ing SMART SPOT
• Reduce distance to receiver /
display
Solution
• Connect to sensor as per in-
structions
• Also press the connection
button on the sensor
• Function OK
• Change battery on the sensor
• The receiver has been reset
to factory settings
stove
SmartSpot