Austroflamm SmartSpot 사용자 지침 - 페이지 12

{카테고리_이름} Austroflamm SmartSpot에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Austroflamm SmartSpot 14 페이지. Room temperature sensor
Austroflamm SmartSpot에 대해서도 마찬가지입니다: 사용자 지침 (20 페이지)

페이지 인쇄

8 | LED colour codes and error causes

LED colour codes and error causes

SmartSpot sensor

LED Status

LED does not light up

LED quickly flashing green

LED flashes yellow

LED flashes red

No or wrong temperature value

No connection

Recorded temperature is too high

Connection is often broken

SmartSpot receiver

LED Status

slowly flashing green

quickly flashing green

Green is lit up

Red flashing

Green is lit up

Red is lit up

No connection

Possible cause

• Insulating strip for batteries

not removed

• Missing or dead battery

• Battery polarity wrong

• "Sign of life" function

• disabled

• The sensor is looking for a

connection

• Battery low

• Battery dead

• SmartSpot is not connected

• The SmartSpot is too far away • Reduce the distance to the

• SmartSpot is incorrectly

placed

• SmartSpot is too far away

from the receiver / display

Possible cause

• No connection to sensor

• Receiver is looking for con-

nection

• Connection to the sensor

maintained

• Battery on the sensor is dead

• FACTORY reset

• The SmartSpot is too far away • Reduce the distance to the

Solution

• Remove insulating strip

• Check batteries

• Insert batteries correctly

• Hold down the appropriate

button

• to enable the "Life" function

again

• On the receiver or display,

also press the button for

"Connect"

• Battery status <20%

• Battery status <10%

• Connect SmartSpot as per in-

structions

stove

• Avoid direct sunlight, proxim-

ity to electrical devices and

other heat sources when us-

ing SMART SPOT

• Reduce distance to receiver /

display

Solution

• Connect to sensor as per in-

structions

• Also press the connection

button on the sensor

• Function OK

• Change battery on the sensor

• The receiver has been reset

to factory settings

stove

SmartSpot