4x4 TOUGH 6068 Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Winden 4x4 TOUGH 6068 herunter. 4x4 TOUGH 6068 16 Seiten. 4wd winch

Battery Replacement

The hand control is supplied with a Alkaline 23A 12V battery within the hand control and a spare battery if

it requires changing.

CAUTION:

• Keep battery out of reach of children.

• If a child swallows a battery seek medical advise immediately.

• Do not use any metallic devices to install battery - this may cause a short circuit.

Figure 1.

• To open remote hand control unscrew 4

screws and carefully pull apart the two halves.

Figure 7.

• To open control box unscrew 4

screws and carefully lift the lid.

PLEASE CONTACT THE AFTER SALES SUPPORT TEAM IF REPLACEMENT PARTS ARE REQUIRED.

Remote hand

control

Figure 2.

• To access the battery, pull off the IN/OUT toggle switch assembly

which is inserted into the 6 recesses on the circuit board. Bend the

front of the printed panel forward. Once the battery is replaced

(ensuring the polarity orientation is correct.ie: Match + to +),

put back the IN/OUT toggle switch assembly and reassemble the

hand control.

Control box

Figure 8.

• Gently lift out old Receiver Component (do not pull out by the wiring)

and unplug. Insert replacement Receiver component.

Battery

Figure 3.

Receiver

component

Figure 9.