4x4 TOUGH 6068 Kullanıcı Kılavuzu - Sayfa 14

Vinçler 4x4 TOUGH 6068 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 4x4 TOUGH 6068 16 sayfaları. 4wd winch

Battery Replacement

The hand control is supplied with a Alkaline 23A 12V battery within the hand control and a spare battery if

it requires changing.

CAUTION:

• Keep battery out of reach of children.

• If a child swallows a battery seek medical advise immediately.

• Do not use any metallic devices to install battery - this may cause a short circuit.

Figure 1.

• To open remote hand control unscrew 4

screws and carefully pull apart the two halves.

Figure 7.

• To open control box unscrew 4

screws and carefully lift the lid.

PLEASE CONTACT THE AFTER SALES SUPPORT TEAM IF REPLACEMENT PARTS ARE REQUIRED.

Remote hand

control

Figure 2.

• To access the battery, pull off the IN/OUT toggle switch assembly

which is inserted into the 6 recesses on the circuit board. Bend the

front of the printed panel forward. Once the battery is replaced

(ensuring the polarity orientation is correct.ie: Match + to +),

put back the IN/OUT toggle switch assembly and reassemble the

hand control.

Control box

Figure 8.

• Gently lift out old Receiver Component (do not pull out by the wiring)

and unplug. Insert replacement Receiver component.

Battery

Figure 3.

Receiver

component

Figure 9.