4x4 TOUGH 6068 Kullanıcı Kılavuzu - Sayfa 13

Vinçler 4x4 TOUGH 6068 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 4x4 TOUGH 6068 16 sayfaları. 4wd winch

Sayfayı Yazdır

Winching Principles

You need a winch to be powerful enough to pull your vehicle while overcoming the added resistance caused by obstacles, moving

water, mud, snow, sand or inclines.

As a general guide you need a winch with a maximum line pull at least 1.5 times greater than the gross vehicle weight. There are three

and are for reference only.

1. Gross Vehicle Weight (Wt): Contains a vehicle weight and the weight of the supplies and equipments carried.

2. Surface Drag (S): The characteristics of the terrain or surface to be traversed.

SURFACE TYPE

Metal

Surface Drag (s)

0.15

3. Gradient resistance: The incline of grade or slope on which the vehicle is being moved.

A gradient of 10% is a rise of one metre in ten metres.

Gradient

10%

Angle (ref.)

Value of (G)

0.06

0.11

Rolling Pull Effect required=(Wt X S) + (Wt X G)

For example, if a vehicle weighing 2994 Kgs is winched by 100% on an off road surface,

the above formula would be used as follows:

(Wt X S)+ (Wt X G)

= 1557 Kgs + 2126 Kgs

= 3683 Kgs of effect required to recover the vehicle

Rated Line Pull

12000Lbs (5443kgs) single line.

Motor

Series wound DC 12V with 6hp/4.5kw

Gear Train

output 3 stage planetary

Gear Ratio

265:1

Clutch

Sliding ring gear

Braking Action

Automatic in the drum

Battery

Recommended 650 CCA minimum for winching

Line pull

Lbs

Kgs

Line speed

FPM

MPM

Motor current Amps

Remote Hand Control Operation

Note:

It is recommended that for the initial set-up of the winch (prior to applying any load)

that the winch be operated in the WIRED mode.

• Before commencing any operation with the winch using the remote hand control

ensure that the isolator switch on the side of the control box is in the OFF position.

• Plug the control cable (with the remote hand controller attached) into the socket on

the control box and turn slightly anti-clockwise to lock into position.

• Turn the isolator switch to the ON position.

• Once the winch has been set-up then the remote hand control can be operated either

in the WIRED OR WIRELESS mode.

• To use the remote hand controller in the WIRELESS mode unplug the remote hand

controller from the control cable.

• If at any stage during operation the remote hand controller fails to operate the winch,

reset the control box by turning the isolator switch off then back on.

• The hand control is not waterproof and care must be taken in its usage.

In the event of damage or breakage, replacement hand controls are available to be

purchased through the 4x4 Tough customer service helpline.

Sand

Gravel

Soft Sand

0.18

0.20

0.22

20%

30%

50%

110

170

260

0.2

0.3

0.44

Wt: 2994 Kgs (gross vehicle weight)

G: 0.71 (gradient value of 100%)

2000

907

25.6

7.8

4.88

130

Mud

Marsh

0.32

0.52

70%

100%

350

450

0.58

0.71

Battery Leads

Fairlead

Wire Rope

Drum Size

Dimensions

NW.

Mounting Bolt Pattern

4000

6000

1814

2722

11.9

9.79

3.63

2.98

180

230

1.80m

4-way roller fairlead

9.5mmx26m

64mmx224mm

548mmx160mmx218mm

38kg (84Lbs)

254mmx114.3mm

8000

9500

3629

4310

8.01

5.9

2.44

1.8

290

350

WIRED

LED indicator

WIRELESS

LED light

LED indicator

power ON/OFF

LED light

WIRELESS

ON/OFF switch

Cable engage/

disengage