Dymo ExecuLabel LP150 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Etikettenhersteller Dymo ExecuLabel LP150 herunter. Dymo ExecuLabel LP150 15 Seiten. Professional labelmaker
Auch für Dymo ExecuLabel LP150: Kurzreferenz-Handbuch (8 seiten)
Seite drucken
About Your New Labelmaker
With your DYMO ExecuLabel
you can create a wide variety of high-quality, self-
adhesive labels. You can choose to print your
labels in many different sizes and styles. The
labelmaker uses DYMO D1 label cassettes in
widths of 3/8" (9 mm ) and 1/2" (12 mm). Label
cassettes are also available in a wide range of
colors.
Visit www.dymo.com for information on obtaining
labels and accessories for your labelmaker.
Warranty Registration
Please complete the warranty registration card and
return it to the appropriate Customer Support
address within seven days. Visit www.dymo.com/
registration for details or to register online.
Getting Started
Follow the instructions in this section to print your
first label.
Connecting the Power
The labelmaker is powered by six AAA alkaline
batteries. To save power, the labelmaker will
automatically turn off after two minutes of inactivity.
To insert the batteries
1. Remove the battery compartment cover. See
Figure 2.
Figure 2
™
LP150 labelmaker,
2. Insert the batteries following the
polarity markings (+ and –).
3. Replace the battery compartment cover.
Remove the batteries if the labelmaker will
not be used for a long period of time.
Inserting the Label Cassette
Your labelmaker comes with one label cassette.
Visit www.dymo.com for information about
purchasing additional label cassettes.
To insert the label cassette
1. Lift the label cassette cover to open the label
compartment. See Figure 3.
Figure 3
The first time you use the labelmaker,
remove the protective cardboard insert from
between the print head and pinch roller. See
Figure 3.
2. Make sure the label and ribbon are taut across
the mouth of the cassette and that the label
passes between the guideposts. If necessary,
turn the spool clockwise to tighten the ribbon.
3. Insert the cassette with the label and ribbon
positioned between the print head and pinch
roller. See Figure 4.
US
AUS
NZ
Remove
cardboard insert
3