- ページ 3

ラベルメーカー Dymo ExecuLabel LP150のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dymo ExecuLabel LP150 15 ページ。 Professional labelmaker
Dymo ExecuLabel LP150 にも：クイック・リファレンス・マニュアル (8 ページ)

ページを印刷する

About Your New Labelmaker

With your DYMO ExecuLabel

you can create a wide variety of high-quality, self-

adhesive labels. You can choose to print your

labels in many different sizes and styles. The

labelmaker uses DYMO D1 label cassettes in

widths of 3/8" (9 mm ) and 1/2" (12 mm). Label

cassettes are also available in a wide range of

colors.

Visit www.dymo.com for information on obtaining

labels and accessories for your labelmaker.

Warranty Registration

Please complete the warranty registration card and

return it to the appropriate Customer Support

address within seven days. Visit www.dymo.com/

registration for details or to register online.

Getting Started

Follow the instructions in this section to print your

first label.

Connecting the Power

The labelmaker is powered by six AAA alkaline

batteries. To save power, the labelmaker will

automatically turn off after two minutes of inactivity.

To insert the batteries

1. Remove the battery compartment cover. See

Figure 2.

Figure 2

™

LP150 labelmaker,

2. Insert the batteries following the

polarity markings (+ and –).

3. Replace the battery compartment cover.

Remove the batteries if the labelmaker will

not be used for a long period of time.

Inserting the Label Cassette

Your labelmaker comes with one label cassette.

Visit www.dymo.com for information about

purchasing additional label cassettes.

To insert the label cassette

1. Lift the label cassette cover to open the label

compartment. See Figure 3.

Figure 3

The first time you use the labelmaker,

remove the protective cardboard insert from

between the print head and pinch roller. See

Figure 3.

2. Make sure the label and ribbon are taut across

the mouth of the cassette and that the label

passes between the guideposts. If necessary,

turn the spool clockwise to tighten the ribbon.

3. Insert the cassette with the label and ribbon

positioned between the print head and pinch

roller. See Figure 4.

AUS

Remove

cardboard insert