Gadgets and Gear 96-007 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera Gadgets and Gear 96-007 herunter. Gadgets and Gear 96-007 2 Seiten. Usb flash drive hidden camera
Auch für Gadgets and Gear 96-007: Schnellstart-Handbuch (2 seiten)

Gadgets and Gear 96-007 Benutzerhandbuch
USB Flash Drive Hidden Camera Manual
!
Step 1:
Plug the USB into the USB port on your
computer. This device is compatible with
both PC and Mac operating systems.
plug here
B
I
H
A. Camera Lens
B. Microphone
C. USB
D. Micro SD Card Slot
E. On/Off Button
How to Charge Your Device
The light will glow blue while the device
is charging. When the device is fully
charged, the light will flash red.
lights will show here
USB Key
A
C
D
F. Camera/Photo Button
G. Indicator Light
H. Motion Detection Button
I. Cover
Step 2a:
How to Turn On/Off Your Device
Step 1: Press and hold the on/off button until the device
vibrates and the light glows purple.
Step 2: The device is now on and in standby mode and light
will glow red.
Step 3: To turn off the device, hold the on/off button until the
device vibrates and the red light blinks 3 times then turns off.
*Note: Press the camera/photo and on/off button at the
same time to reset it.
How to Record Video
Step 1: Once in standby mode (light will be glowing red)
press and hold the camera/photo button for 3 seconds.
Step 2: The device will then vibrate twice and the red light
will flash 3 times. After the third flash the camera will
begin recording immediately.
E
Step 3: To stop recording, press the camera/photo button once.
Step 4: The device will stop and save your current recording
F
and return to standby mode (light will be glowing red).
G
How to Take a Photo
Step 1: Once in standby mode (light will be glowing red)
press the camera/photo button once.
Step 2: The light will turn blue and the device will vibrate
once indicating the picture was taken.
Step 3: The light will then return to standby mode and the
light will glow red again.
How to Record Motion Detected Video
Step 1: Once in standby mode (light will be glowing red)
press the motion detection button once.
Step 2: The device will vibrate 3 times and the light will
flash purple 4 times.
Step 3: Now whenever there is movement in front of the
camera, it will automatically start recording.
Step 4: Press the motion detection button once again to
exit motion detection mode, and return to standby mode
(light will glow red again).
Step 2b:
If you have a USB wall charger, you can
charge the device in a wall outlet.
*Note: This product does not come with one.
lights will show here