Gadhouse MATHIS Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drehscheibe Gadhouse MATHIS herunter. Gadhouse MATHIS 12 Seiten.

Seite drucken

3. Stereo System Connection

Set the PHONO & Line Out Switch on LINE mode. The RCA PHONO & Line

Out Jacks output analog line-level signals and could be connected directly

with a par of active/powered speakers of the appropriate input of your

stereo system.

The Red plug connects with the Right channel and the White plug

connects with the Left channel.

NOTE:

The RCA Jacks are not designed to be connected directly to the

passive/unpowered speakers on LINE mode. If connected to the passive

speakers, there is no sound.

4. USB-Encoding

Visit our tutorial page to see the instruction of both macOS/Windows

operating system

www.gadhouse.com/tutorial or QR code below;

TROUBLESHOOTING GUIDE

To keep the warranty valid, never try to repair the product yourself. If you

encounter problems when using this product, check the following points

in the table below before requesting service. If the problem remains

unsolved, directly contact customer service

e-mail: [email protected]

Problem

· The turntable is not connected to the

There is no power:

power adapter.

No power at the outlet.

· The unit is not connected to the main

The platter doesn't

power supply.

turn although the

· No power at the outlet.

unit is switched on:

Drive belt is not installed or has

slipped off.

No signal through

· Phono input not selected on ampliﬁer.

one or both

· Ampliﬁer not switched on.

· Ampliﬁer or speakers muted.

channels:

No connection to the speakers.

No connection between turntable and

ampliﬁer

Wire leads not connected the cartridge.

· No ground connection from cartidge, arm,

Strong hum on

or arm cable to ampliﬁer or ground loop.

phono input:

Turntable is too close to speakers.

Troubleshooting guide