Gadhouse MATHIS 사용자 설명서 - 페이지 9

{카테고리_이름} Gadhouse MATHIS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gadhouse MATHIS 12 페이지.

페이지 인쇄

3. Stereo System Connection

Set the PHONO & Line Out Switch on LINE mode. The RCA PHONO & Line
Out Jacks output analog line-level signals and could be connected directly
with a par of active/powered speakers of the appropriate input of your
stereo system.
The Red plug connects with the Right channel and the White plug
connects with the Left channel.
NOTE:
The RCA Jacks are not designed to be connected directly to the
passive/unpowered speakers on LINE mode. If connected to the passive
speakers, there is no sound.

4. USB-Encoding

Visit our tutorial page to see the instruction of both macOS/Windows
operating system
www.gadhouse.com/tutorial or QR code below;
16

TROUBLESHOOTING GUIDE

To keep the warranty valid, never try to repair the product yourself. If you
encounter problems when using this product, check the following points
in the table below before requesting service. If the problem remains
unsolved, directly contact customer service
Problem
· The turntable is not connected to the
There is no power:
power adapter.
No power at the outlet.
· The unit is not connected to the main
The platter doesn't
power supply.
turn although the
· No power at the outlet.
unit is switched on:
Drive belt is not installed or has
slipped off.
No signal through
· Phono input not selected on amplifier.
one or both
· Amplifier not switched on.
· Amplifier or speakers muted.
channels:
No connection to the speakers.
No connection between turntable and
amplifier
Wire leads not connected the cartridge.
· No ground connection from cartidge, arm,
Strong hum on
or arm cable to amplifier or ground loop.
phono input:
Turntable is too close to speakers.
Troubleshooting guide
17