5G HUB QCOM tool Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Computer Hardware 5G HUB QCOM tool herunter. 5G HUB QCOM tool 14 Seiten.

3- Connect the board to a USB cable to PC, then you shall see the ports and modem in the

Windows device manager as in this screenshot:

3 Use QCOM tool with BG96/BG95/EG91/EG95

Install the QCOM tool from this location:

5G-NB-IoT/Tools at master · 5ghub/5G-NB-IoT (github.com)

To use the QCOM tool with LTE&GNSS modem, connect the computer USB port to the USB port on

the hardware board and make sure all modem serial ports are enumerated in the Windows device

manager as in figure below.

The serial ports below can be used for the following purposes:

USB Modem: The USB modem interface is used for AT commands, data transmission, GNSS

•

data and NMEA sentences output.

•

USB AT Port: It is used for AT commands and data transmission.

•

USB NMEA Port: It is used for GNSS data and NMEA sentences output.

QCOM Tool v1.6