Gage Bilt GB722 Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Werkzeuge Gage Bilt GB722 herunter. Gage Bilt GB722 13 Seiten. Installation tool
Auch für Gage Bilt GB722: Original-Bedienungsanleitung (20 seiten), Original-Bedienungsanleitung (20 seiten)

Seite drucken
Gage Bilt GB722 Installationshandbuch
HEAD
Remove nose assembly from tool before attempting disassembly of head cylinder assembly (752119). Remove end cap (722317).
Push against threaded end of piston (752507) to slide it out of head cylinder assy (752119). Be careful not to damage threads or cause
burrs on polished piston rod surface.
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.)
Apply Loctite® #242 and torque the four socket-head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the
gasket (704129).
S/N: 1753 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
9
REV. 1/15