Gage Bilt GB722 Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Инструменты Gage Bilt GB722. Gage Bilt GB722 13 страниц. Installation tool
Также для Gage Bilt GB722: Оригинальное руководство по эксплуатации (20 страниц), Оригинальное руководство по эксплуатации (20 страниц)

HEAD

Remove nose assembly from tool before attempting disassembly of head cylinder assembly (752119). Remove end cap (722317).

Push against threaded end of piston (752507) to slide it out of head cylinder assy (752119). Be careful not to damage threads or cause

burrs on polished piston rod surface.

WARNING:

Dispose of Hydraulic Oil in accordance with applicable regulations.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.)

Apply Loctite® #242 and torque the four socket-head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the

gasket (704129).

S/N: 1753 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

REV. 1/15