Dyna-Glo Delux RMC-FA300DGD Betriebsanleitung & Teilehandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Betriebsanleitung & Teilehandbuch für Heizgerät Dyna-Glo Delux RMC-FA300DGD herunter. Dyna-Glo Delux RMC-FA300DGD 11 Seiten. Delux propane construction heater
Auch für Dyna-Glo Delux RMC-FA300DGD: Betriebsanleitung & Teilehandbuch (12 seiten)

Seite drucken

Dyna-Glo

Delux Operating Instructions and Parts Manual

Dyna-Glo

ProFitter

Propane Construction Heater

Troubleshooting Chart

Symptom

Fan does not turn when

electrical connection is

made

Heater will not ﬁre

Heater quits while

running

Always be sure to follow proper maintenance procedures, by cleaning the heater once per month during regular

usage, and check spark gap at least once per season.

For Technical Support or Troubleshooting, Call: 1-877-447-4768, 8:30 am - 4:30 pm CST

& Dyna-Glo

Possible Cause(s)

1. No electric power to heater

2. Fan blade contacts inside of heater

housing

3. Fan blade(s) bent

4. Fan motor defective

1. No spark at igniter

2. Improper spark gap

3. Bad electrode

1. Internal temperature too high causing

limit switch to shut down operation

2. Damaged control valve

3. Dust or debris build-up inside of heater

Corrective Action

1. Check current to electric outlet. If voltage is

correct, check power cord and extension cord for

cuts and breaks

2. Be sure that housing is not damaged. Make sure

there are no obstructions to the fan

3. Straighten blade(s) to match others

4. Replace motor

1. Check igniter wire. Reattach or tighten if loose.

Check spark module. Replace if necessary. Check

all electrical components

2. Set gap to 0.08"

3. Replace spark plug

1. If the heaters output is restricted, internal tem-

pera ture becomes too high. Move heater away

from any obstructions

2. Replace control valve

3. Clean inside of heater

RMC-FA300DGD