Dyna-Glo Delux RMC-FA300DGD 사용 설명서 및 부품 설명서 - 페이지 9

{카테고리_이름} Dyna-Glo Delux RMC-FA300DGD에 대한 사용 설명서 및 부품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dyna-Glo Delux RMC-FA300DGD 11 페이지. Delux propane construction heater
Dyna-Glo Delux RMC-FA300DGD에 대해서도 마찬가지입니다: 사용 설명서 및 부품 설명서 (12 페이지)

페이지 인쇄

Dyna-Glo

Delux Operating Instructions and Parts Manual

Dyna-Glo

ProFitter

Propane Construction Heater

Troubleshooting Chart

Symptom

Fan does not turn when

electrical connection is

made

Heater will not ﬁre

Heater quits while

running

Always be sure to follow proper maintenance procedures, by cleaning the heater once per month during regular

usage, and check spark gap at least once per season.

For Technical Support or Troubleshooting, Call: 1-877-447-4768, 8:30 am - 4:30 pm CST

& Dyna-Glo

Possible Cause(s)

1. No electric power to heater

2. Fan blade contacts inside of heater

housing

3. Fan blade(s) bent

4. Fan motor defective

1. No spark at igniter

2. Improper spark gap

3. Bad electrode

1. Internal temperature too high causing

limit switch to shut down operation

2. Damaged control valve

3. Dust or debris build-up inside of heater

Corrective Action

1. Check current to electric outlet. If voltage is

correct, check power cord and extension cord for

cuts and breaks

2. Be sure that housing is not damaged. Make sure

there are no obstructions to the fan

3. Straighten blade(s) to match others

4. Replace motor

1. Check igniter wire. Reattach or tighten if loose.

Check spark module. Replace if necessary. Check

all electrical components

2. Set gap to 0.08"

3. Replace spark plug

1. If the heaters output is restricted, internal tem-

pera ture becomes too high. Move heater away

from any obstructions

2. Replace control valve

3. Clean inside of heater

RMC-FA300DGD