AirCom SealAir2K Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Luftkompressor AirCom SealAir2K herunter. AirCom SealAir2K 6 Seiten.

Seite drucken

USER GUIDE - Tire Repair Products

ENG

USER MANUAL

ATTENTION! READ ALL INSTRUCTIONS CAREFULLY.

SAFETY WARNING: Before using the Tire Repair Products by Aircom,

carefully read and understand these instructions and warnings.

Complying with these instructions is crucial for ensuring vehicle safety.

Failure to comply may result in tire damage, a ecting vehicle handling,

potentially leading to a loss of control and serious injury or death. If the

standard items for dealing with a puncture have been replaced by the Tire

Repair Products by Aircom, inform all other vehicle users.

Read before use: The SealAir2K Products are designed to temporarily

restore car mobility by sealing most tire punctures caused, for example, by

nails or similar foreign objects with a diameter of up to 6 mm. However, note

that some types and extents of tire damage may not be sealable or can only

be partially sealed.

The bottle of sealant with an adapter can be used with compressors from

other manufacturers.

Loss of tire pressure can signiﬁcantly a ect vehicle handling and may lead to

loss of vehicle control, which could result in serious injury or even death.

Observing Rules: When using the SealAir2K Products by Aircom, adhere to the

following guidelines:

• The bottle with an adapter can be used with a compressor with a pressure

range of 5 to 6 bar.

• Drive cautiously, avoiding sudden steering or driving maneuvers, particularly

when the vehicle is heavily loaded or towing a trailer.

• These products are a temporary solution, allowing you to drive a maximum

of 1000 km or to the nearest vehicle or tire dealer for proper repair or replace-

ment.

• Do not exceed a maximum speed of 80 km/h.

• Store the SealAir2K Products securely in the vehicle's trunk, avoiding

placement in the passenger compartment to prevent injury during sudden

stops or collisions.

These instructions provide a step-by-step explanation of how to use the

SealAir2K Products to temporarily repair a tire puncture. Please read the

section on "How to proceed in the event of a tire puncture".

WARNING: Please do not use the SealAir2K Products if your tire has

been damaged due to driving with insu cient inﬂation. The kit is

designed to seal punctures located within the visible tread of the tire

only. Do not attempt to seal damage to the tire's sidewall or any other

type of damage. Do not use The SealAir2K Products if the tire and rim are

damaged.

Using The SealAir2K Products for any other purpose, than its intended

use, can lead to severe accidents or injuries as compressed air can act as

an explosive or propellant. It is essential to follow the instructions in the

manual and use the kit only for temporary repairs of tire punctures

located in the visible tread of the tire. Failure to follow these instructions

can result in serious injury or death.

WARNING: Do not insert any parts of The SealAir2K Products into

any holes of your or other people's body. Do not ingest, swallow, or

consume any parts or contents of The SealAir2K Products. This can

cause serious injury or harm. The set is intended for its speciﬁed

use only and misuse can result in severe consequences. Please

read the instructions carefully and use the set as directed.

WARNING: If you want to use unusual tires (such as those with sound-

prooﬁng foam or special cord), determine their compatibility with the

service department.

Be careful not to overinﬂate items with soft inﬂatables, such as rafts,

balls, and other similar items, that do not have recommended pressure

markings beyond their capacity.

HOW TO USE TIRE REPAIR KIT SAFELY:

• Read all instructions and warnings carefully before using The SealAir2K

Products.

• Use The SealAir2K Products only with original vehicle tires.

• Ensure that standard items for dealing with a puncture, such as a spare

tire, have been replaced by the SealAir2K Products.

• Do not attempt to seal damage other than that located within the

visible tread of the tire or on the tire's sidewall.

• Do not use the SealAir2K Products for any other purpose other than its

intended use.

• Do not eat, drink or smoke while using the SealAir2K Products.

• Only use the SealAir2K Products with tubeless tires.

• Avoid breathing dust/fume/gas/mist/vapors/spray and contact with

skin, hair, eyes, and clothes. Protect your eyes when repairing tires.

• Ensure good workplace ventilation and wear appropriate respiratory

protection if ventilation is insu cient.

• Do not use CO2 to inﬂate your tubeless tire.

• Always check tire pressure before driving.

• After use, put the ﬁlling hose in a plastic bag to avoid prevent excess tire

sealant from leaking.

• Before driving, ensure the tire is adjusted to the recommended inﬂation

pressure and monitor tire pressure until the sealed tire is replaced.

• Always use a tire gauge to check the actual pressure in tires. Do not

over-inﬂate the tire.

• Do not run the vehicle while the compressor is operating. Place the

vehicle in the "accessory" or "on" position, set the emergency brake, and

ensure the car is in a park mode.

• Park your vehicle at the roadside so that you do not obstruct the ﬂow of

tra c and you are able to use the SealAir2K Products without being in

danger.

• Set the parking brake, even if you have parked on a level road, to ensure

that the vehicle will not move.

• Do not use the SealAir2K Products if the ambient temperature is below

-30°C (-22°F) or if the tire and rim are damaged.

• Get all passengers to exit the car and take them away from the dange-

rous area. If necessary, place a warning triangle and put on a high-visibility

vest.

• Do not block the compressor input or output while operating.

• Do not attempt to remove foreign objects like nails or screws that have

penetrated the tire. Leave them in the same place where they were

located.

• Never leave the SealAir2K Products unattended while in use.

• Do not keep the compressor operating longer than 15 min. otherwise

there is a risk of it overheating. Allow compressor to cool down between

use. (Compressor can work between 5-20 min depending on outside

temperature )

• Replace the sealant bottle with a new one before the expiration date is

reached (see bottle label). If the sealant has expired, the functionality

cannot be fully guaranteed.

• Before using the SealAir2K Products, observe the warning and danger

information provided on the device and on the sealant bottle.

• The SealAir2K Products should be used only to seal/pump tires recom-

mended for cars and light vehicles for commercial purposes up to 3.5 t

(PC/Me, PC/H, SUV, VAN).

• Always ensure the air hose chuck touches the core of the valve stem for

proper inﬂation.

• For use with 12 volt DC power outlets rated 15 amps or higher. Do not

use with older 8 amp cigarette lighter receptacles.

• Dispose of contents and containers are in accordance with all local,

regional, national, and international regulations. An empty bottle can be

thrown into a plastic container.

HEALTH & SAFETY CAUTION:

• Avoiding Contact:

Avoid inhaling fumes and dust while using the product.

Wear eye protection during tire repair.

Avoid direct contact with skin, hair, eyes, and clothes.

Wash hands after any contact with the product.

• Chemical Exposure:

The chemical products in the adhesive and sealing systems might cause

health e ects.

Avoid contact with skin, hair, or eyes as it may lead to allergic skin

reactions.

If accidentally ingested, rinse the mouth thoroughly and drink plenty of

water. Seek medical advice if necessary.

• Workplace Ventilation:

Ensure proper workplace ventilation while using the SealAir2K Products.

Avoid running the engine in poorly ventilated areas.

Use appropriate respiratory protection if ventilation is insu cient.

• First Aid Measures:

If someone inhales the product, move them to fresh air immediately.

In case of accidental ingestion and discomfort, seek medical attention or

contact a poison control center.

• Sealant Leaks:

If the sealant leaks, allow it to dry before removal.

These health and safety cautions aim to prevent any potential health

hazards or accidents while using the SealAir2K Products. Always prioritize

safety measures and follow recommended guidelines during the tire

repair process.