Great day UVFR751 Anweisungen für Installation und Gebrauch
Blättern Sie online oder laden Sie pdf Anweisungen für Installation und Gebrauch für Zubehör für Kraftfahrzeuge Great day UVFR751 herunter. Great day UVFR751 5 Seiten. Utv front rack
Seite drucken
PAGE 1 OF 5
2-5-15
UTV FRONT RACK
MODEL: UVFR751
READ ALL INSTRUCTIONS & WARNINGS BEFORE USING THE UTV FRONT RACK
NOTE: Failure to read instructions before use could result in injury or death.
Instructions for Installation and Use:
*Note: UTV's with Round Roll Bar Cages – Refer to Pages 1-4 of this installation Guide
*Note: UTV Front Rack Will NOT FIT Polaris Ranger 570 Midsized UTV with Pro-Fit Roll Cage
*Note: IF INSTALLING ON POLARIS Ranger 570 Full Sized w/ Pro Fit Cage OR Ranger 900/1000 w/ Pro Fit Cage- REFER TO PAGE 5.
Contents:
1 – UTV FRONT RACK
2 – F SHAPED HORIZONTAL RACK SUPPORTS
1 SET – ROLL BAR ANGLE BRACKETS *THESE
HAVE 3 HOLES ON 1 SIDE. THERE IS A LEFT AND
A RIGHT BRACKET.
1 SET- ROLL BAR ANGLE BRACKETS FOR
VEHICLES WITH WINDSHIELD. (SEE NOTE #1)
2 SETS – BRUSH GUARD ANGLE BRACKETS *THESE
HAVE 2 HOLES ON 1 SIDE AND 1 HOLE ON THE
OTHER SIDE. CHOOSE WHICH SET WORKS BEST
WITH YOUR VEHICLE.
2 – 5/16" X 2 1/4" BOLTS & 2 – 5/16" WINGKNOBS
4 – 5/16" X 2" U-BOLTS
16 – 5/16" LOCKNUTS
8 – 1/4" LOCKNUTS
4 – 1/4" X 3 1/2" BOLTS
4 – 1/4" X 1 3/4" BOLTS
2- 5/16" X 3 1/2'" BOLTS
2- 5/16" X 1 1/4" BOLTS
4 – THIN NYLON WASHERS
2 – MEDIUM NYLON WASHERS
52 – FLAT WASHERS
4 - PLUGS
CONTENTS
4 – SETS OF VERTICAL SUPPORT BARS (VARIOUS
LENGTHS)