Great day UVFR751 Инструкции по установке и использованию
Просмотреть онлайн или скачать pdf Инструкции по установке и использованию для Автомобильные аксессуары Great day UVFR751. Great day UVFR751 5 страниц. Utv front rack
Печатать страницу
PAGE 1 OF 5
2-5-15
UTV FRONT RACK
MODEL: UVFR751
READ ALL INSTRUCTIONS & WARNINGS BEFORE USING THE UTV FRONT RACK
NOTE: Failure to read instructions before use could result in injury or death.
Instructions for Installation and Use:
*Note: UTV's with Round Roll Bar Cages – Refer to Pages 1-4 of this installation Guide
*Note: UTV Front Rack Will NOT FIT Polaris Ranger 570 Midsized UTV with Pro-Fit Roll Cage
*Note: IF INSTALLING ON POLARIS Ranger 570 Full Sized w/ Pro Fit Cage OR Ranger 900/1000 w/ Pro Fit Cage- REFER TO PAGE 5.
Contents:
1 – UTV FRONT RACK
2 – F SHAPED HORIZONTAL RACK SUPPORTS
1 SET – ROLL BAR ANGLE BRACKETS *THESE
HAVE 3 HOLES ON 1 SIDE. THERE IS A LEFT AND
A RIGHT BRACKET.
1 SET- ROLL BAR ANGLE BRACKETS FOR
VEHICLES WITH WINDSHIELD. (SEE NOTE #1)
2 SETS – BRUSH GUARD ANGLE BRACKETS *THESE
HAVE 2 HOLES ON 1 SIDE AND 1 HOLE ON THE
OTHER SIDE. CHOOSE WHICH SET WORKS BEST
WITH YOUR VEHICLE.
2 – 5/16" X 2 1/4" BOLTS & 2 – 5/16" WINGKNOBS
4 – 5/16" X 2" U-BOLTS
16 – 5/16" LOCKNUTS
8 – 1/4" LOCKNUTS
4 – 1/4" X 3 1/2" BOLTS
4 – 1/4" X 1 3/4" BOLTS
2- 5/16" X 3 1/2'" BOLTS
2- 5/16" X 1 1/4" BOLTS
4 – THIN NYLON WASHERS
2 – MEDIUM NYLON WASHERS
52 – FLAT WASHERS
4 - PLUGS
CONTENTS
4 – SETS OF VERTICAL SUPPORT BARS (VARIOUS
LENGTHS)