Hi-Force TWE Series Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Elektrowerkzeug Hi-Force TWE Series herunter. Hi-Force TWE Series 20 Seiten. Electric torque wrench
Seite drucken
Prepared by:-
M.DAVIES
REV NO:-
1
ECO:-
1.3. OPERATING PARAMETERS
The Hi-Force Electric Torque wrench and the Hi-Force electric angle torque wrench are hand-controlled
tools and must be used exclusively for tightening and loosening bolted connections.
The minimum and maximum torque values are indicated on the wrench and in addition are recorded in
the attached setting table.
The torque wrench must only be used with the reaction arms supplied as standard by Hi-Force.
Consult Hi-Force, before modifying any support arm, as an uncontrolled operating state (overturning
moment) can occur, and lead to the risk of accidents.
Any modification to the tool or associated parts without prior written permission from Hi-Force, will be
deemed as improper use and all warranty and guarantees on the tool are declared invalid.
The wrench must not be used in an atmosphere where explosions are possible, for example in explosive
gas, vapours, or dust
.
Use of the tool for any applications other than its intended purpose is deemed to be improper use and
warranty will be void.
Any unauthorized conversions or modifications of the device are prohibited on safety grounds.
All operating and maintenance provisions contained within this operating manual must be complied with.
1.4. EMISSIONS
The permanent level of sound pressure is 78 dB(A) according to DIN 45635.
Vibration is lower than 2,5 m/s2.
1.5. RISK ASSESSMENT
Incorrect use poses the risk of crushing, shearing and serious damage to the torque wrench.
Risk of crushing and shearing
A jam and shear risk is possible between reaction arm and abutment (fig. 1+2).
The reaction arm must find a close rest
Fig: 1
OPERATING INSTRUCTIONS:
Electric Torque Wrench
Series: TWE
Approved by:-
!
Fig: 2
Page 5 of 20
TDS:-
1399
Date: 25/03/14