Hi-Force TWE Series 사용 설명서 - 페이지 5

{카테고리_이름} Hi-Force TWE Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Force TWE Series 20 페이지. Electric torque wrench

Prepared by:-

M.DAVIES

REV NO:-

ECO:-

1.3. OPERATING PARAMETERS

The Hi-Force Electric Torque wrench and the Hi-Force electric angle torque wrench are hand-controlled

tools and must be used exclusively for tightening and loosening bolted connections.

The minimum and maximum torque values are indicated on the wrench and in addition are recorded in

the attached setting table.

The torque wrench must only be used with the reaction arms supplied as standard by Hi-Force.

Consult Hi-Force, before modifying any support arm, as an uncontrolled operating state (overturning

moment) can occur, and lead to the risk of accidents.

Any modification to the tool or associated parts without prior written permission from Hi-Force, will be

deemed as improper use and all warranty and guarantees on the tool are declared invalid.

The wrench must not be used in an atmosphere where explosions are possible, for example in explosive

gas, vapours, or dust

Use of the tool for any applications other than its intended purpose is deemed to be improper use and

warranty will be void.

Any unauthorized conversions or modifications of the device are prohibited on safety grounds.

All operating and maintenance provisions contained within this operating manual must be complied with.

The permanent level of sound pressure is 78 dB(A) according to DIN 45635.

Vibration is lower than 2,5 m/s2.

Incorrect use poses the risk of crushing, shearing and serious damage to the torque wrench.

Risk of crushing and shearing

A jam and shear risk is possible between reaction arm and abutment (fig. 1+2).

The reaction arm must find a close rest

Fig: 1

OPERATING INSTRUCTIONS:

Electric Torque Wrench

Series: TWE

Approved by:-

Fig: 2

Page 5 of 20

TDS:-

1399

Date: 25/03/14