Active Silicon HARRIER Schnellstart-Handbuch - Seite 13
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Aufnahmegeräte Active Silicon HARRIER herunter. Active Silicon HARRIER 15 Seiten. Usb/hdmi camera interface board
Seite drucken
Using the Harrier Virtual Serial COM port
The Harrier Virtual Serial COM port is part of the
Software section
of the Active Silicon website. If the SDK is installed, DIP switch SW1 [7] on the
interface board is set to ON and the Harrier USB/HDMI interface board USB port is connected to the
PC with a suitable cable, the Harrier Virtual Serial COM port appears in the Device Manager
COM/LPT Port list (Figure 11).
The Harrier Virtual Serial COM port can be used to send and receive VISCA commands in the same
way as an ordinary serial COM port. As there is no physical serial hardware, the serial port settings
will not affect the function of the Harrier Virtual Serial COM port.
Note: by default the Harrier USB/HDMI Camera Interface Board is configured not to send VISCA
command Acknowledge and Complete responses to optimize the USB video transfer. This behavior
can be changed using the Harrier USB/HDMI interface board VISCA command.
Supported Cameras
CAMERA
Tamron MP1110M-VC/-WP
Tamron MP2030M-GS
Sony FCB-EV7520A
Harrier 10x AF-Zoom Camera
Harrier 36x AF-Zoom Camera
Table 3. Cameras supported by the Harrier USB/HDMI Camera Interface Board.
To change the configuration of your Harrier USB/HDMI Camera Interface Board please go to the
software section of
www.ActiveSilicon.com
Instructions for changing the board configuration are included in the download.
Technical Support
In case of any issues, please contact Active Silicon Technical Support on the telephone numbers
below or by email to [email protected].
March 2021
HARRIER USB/HDMI CAMERA INTERFACE BOARD
Harrier USB
WINDOWS DEVICE MANAGER NAME
Active Silicon Harrier T1110-2
Active Silicon Harrier T2030-2
Active Silicon Harrier S7520A-2
Active Silicon Harrier 10LHD-2
Active Silicon Harrier 36LGHD-2
and download the
QUICK START GUIDE
Version 1.7 – March 2021
SDK. This can be downloaded from the
HarrierControl
software.
Page 13 of 14