6KU TRACK Schritt-für-Schritt-Bauanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Schritt-für-Schritt-Bauanleitung für Motorrad 6KU TRACK herunter. 6KU TRACK 17 Seiten.
Seite drucken
- 1. Table of Contents
- 2. Tools
- 3. Let's Get Started
- 4. Installing the Handlebar
- 5. Installing the Front Wheel
- 6. Aligning the Stem
- 7. Installing the Seatpost
- 8. Optimizing the Brake Pads
- 9. Preparing Pedals for Installation
- 10. Installing the Pedals
- 11. Pumping the Tires
- 12. Let's Finish up that Handlebar
- 13. Optional Fixed Gear/Freewheel
- 14. Contact Information
INSTALLING THE
SEATPOST
a.
Get started by applying a small
amount of grease into the mouth of the
seat tube.
b.
Next, insert the seatpost into the
seat tube.
c.
Now set the seatpost to your desired
height, making sure the seat is parallel
and aligned to flat ground.
d.
Finally, tighten the seatpost clamp
with your 5mm Allen Key.
6