6KU TRACK Schritt-für-Schritt-Bauanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Schritt-für-Schritt-Bauanleitung für Motorrad 6KU TRACK herunter. 6KU TRACK 17 Seiten.
Seite drucken
- 1. Table of Contents
- 2. Tools
- 3. Let's Get Started
- 4. Installing the Handlebar
- 5. Installing the Front Wheel
- 6. Aligning the Stem
- 7. Installing the Seatpost
- 8. Optimizing the Brake Pads
- 9. Preparing Pedals for Installation
- 10. Installing the Pedals
- 11. Pumping the Tires
- 12. Let's Finish up that Handlebar
- 13. Optional Fixed Gear/Freewheel
- 14. Contact Information
LET'S GET STARTED
a.
Cut and remove the white straps
around the box.
b.
Pop open the top lid of the box (if
your box has staples, be mindful of
them).
c.
Carefully pull your bicycle out of the
box.
d.
Grab your clippers and get ready to
remove some zip ties
(be mindful to
not scratch your bike).
e.
First, cut all zip ties off from the front
wheel and carefully slide the front
wheel off of the crank arm.
f.
Remove all cardboard and plastic
covers from the front wheel.
g.
Next, cut all zip ties off of the
accessory box and stem on the front of
the fork.
h.
Finally, cut all zip ties off of the
handlebars and turn the fork around so
it's facing forward.
i.
Remove packaging material from the
stem and handlebar.
2